ENGLISH
CRYSTAL analytical balance
Page 22 of 45
INSRUCTION MANUAL - 60.50.630 9th issue –December 2014
6. OPERATING INSTRUCTIONS
Wait for about 3 hours after power-up before performing any high accuracy weighing operation.
It is advisable to leave the balance permanently on (connected to the AC line).
It is possible to switch off only the display with the ON/OFF key, this allows a quick recovery when the
balance is switched on.
Crystal balances have ranges with capacity of 110 g, 210 g, 310 g, 510 g with up to 0.1 mg resolution.
Pressing the ON/OFF key, after the display test, the indication 0,0000 g. appears.
If the instrument has not been used for more than an hour, perform a weighing operation with at least 10 g
before high precision measurements.
7. KEYBOARD OPERATION
The keyboard has four control keys: PRINT, MODE, TARE, ON-OFF.
Every key has a specific function, while keys MODE, TARE and ON-OFF also acivate a second function.
If the keys are activated for less than 1 second the first function is activated, when pressed for more the
second function will be active.
The table below shows the operation capabilities.
Normal use
KEY
NAME
KEY ACTIVATED FOR LESS
THAN 1 SECOND
KEY ACTIVATED FOR MORE THAN 1
SECOND
On/Off
Display illumination on/off
Balance on/off
Mode
See additional functions
See additional functions
Tare
Tare function
Tare function
Print function
No function
Main & configuration menu
KEY
NAME
KEY ACTIVATED FOR LESS
THAN 1 SECOND
KEY ACTIVATED FOR MORE THAN 1
SECOND
On/Off
Confirm selection
No function
Mode
Scroll available items
No function
Tare
Exit current selection
No function
No function
No function
8. TARE
After a container is placed on the pan, push the TARE key to zero the reading.
The balance has a tare capacity up to its total measuring range.
Place the sample to be weighed in the container.
The display shows the sample net weight.
It is possible to use the tare key again and again after adding several samples, up to the maximum capacity
of the balance, indicated by a bargraph on the left side of the LCD display.
