GIARDINO 34.014.64, Operating Instructions Manual

Page: 13 / 60

13
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the warning signs on the machine
(see Fig. 1a)
A
Warning!
B Read the instruction manual before starting!
C Wear eye protection and ear plugs!
D Protect from moisture!
E Pull out the mains plug before checking a
damaged power cable!
F Keep other people out of the danger area!
G The equipment continues to rotate!
2. Layout (Fig. 1)
1 Power cable
2 Upper Handle
3 ON/OFF switch
4 Spare line spool
5 Additional handle
6 Lock
7 Edge guide
8 Line spool
9 Guard hood
10 Button for adjusting the tilt angle
3. Proper use
The equipment is designed for cutting lawns and
small areas of grass in private and hobby gardens.
Equipment designed for use in private and hobby
gardens is regarded as unsuitable for use in public
facilities, parks and sports centers, along roadways,
or in agriculture and forestry. The operating
instructions as supplied by the manufacturer must be
kept and referred to in order to ensure that the
equipment is properly used and maintained.
Important. This equipment must not be used for
composting purposes (shredding) as this could
result in injury or damage to property.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage 230 V ~ 50 Hz
Power 500 W
Cutting circle Diameter 30 cm
Revolutions n
0
9600 rpm
Cutting line diameter 1.4 mm
L
pA
sound pressure level 83 dB(A)
L
WA
sound power level 96 dB(A)
Vibration a
hv
5,8 m/s²
Weight 2,8 kg
Anleitung_ET_500_30_SPK7:_ 25.11.2008 10:25 Uhr Seite 13