3
Model LP301A/LP301A-4000 Specifications
PULLEY INFORMATION
Pulley selection and pump speed are based on a 1725
RPM motor and “B” section belts. When selecting de-
sired GPM, allow for a ±5% tolerance on pumps output
due to variations in pulleys, belts and motors among
manufacturers.
1. Select GPM required, then select appropriate motor
and pump pulley from the same line.
2. The desired pressure is achieved by selecting the cor-
rect nozzle size that corresponds with the pump GPM.
HORSEPOWER INFORMATION
We recommend that a 1.15 service factor be specified
when selecting an electric motor as the power source.
To compute specific pump horsepower requirements,
use the following formula:
HP = (GPM X PSI) / 1450
U.S.
Metric
Ratings (continuous).............................................. 14.2 GPM @ 4000 PSI @ 1000 RPM .............. 53.6 LPM
Ratings (intermittent) ............................................. 18 GPM @ 4000 PSI @ 1268 RPM ................. 68.1 LPM
Inlet Pressure ........................................................-4.35 to 145 PSI .........................................-0.3 to 10 Bar
Plunger Diameter................................................... 0.95” .................................................................... 24 mm
Stroke ....................................................................1.65” .................................................................... 42 mm
Crankcase Oil Capacity .........................................
118 fl.oz.
............................................................3.5 Liters
Temperature of Pumped Fluids ............................. 140
o
F ......................................................................60
o
C
Inlet Port ........................................................................................................................................1-1/4” BSP
Discharge Port ..................................................................................................................................... 1” BSP
Crankshaft Mounting .....................................................................................................................Either Side
Shaft Rotation .............................................................................................. Top of Pulley Towards Fluid End
Weight ...................................................................119 lbs. ....................................................................54 kg
Crankshaft Diameter........................................................................................................................... 35 mm
*
Intermittent duty only
LP301A PULLEY SELECTION AND
HORSEPOWER REQUIREMENTS
RPM GPM 2500 PSI 3000 PSI 3500 PSI 4000 PSI
500
7.05
12.2
14.6
17.0
19.4
640
9.02
15.6
18.7
21.8
24.9
750 10.57
18.2
21.9
25.5
29.2
805 11.35
19.6
23.5
27.4
31.3
865
12.2
21.0
25.2
29.4
33.7
940 13.25
22.8
27.4
32.0
36.6
1000 14.2
24.5
29.4
34.3
39.2
1268 18.0*
31.0
37.2
43.4
49.7*
6
LP600 PULLEY SELECTION AND
HORSEPOWER REQUIREMENTS
GPM RPM 3000 PSI 4000 PSI 5000 PSI 5800 PSI
4.85 500
10.1
13.5
16.8
19.4
6.2
640
12.9
17.2
21.5
24.8
7.28 750
15.2
20.2
25.3
29.1
7.8
805
16.3
21.6
27.1
31.2
8.4
865
17.5
23.3
29.1
33.6
9.1
940
18.9
25.2
31.6
36.4
9.7 1000
20.2
26.9
33.7
38.8
U.S.
Metric
Volume....................................................................Up to 9.8 GPM .................................................... 37 LPM
Discharge Pressure ................................................5800 PSI .............................................................400 Bar
Inlet Pressure .........................................................-4.35 to 145 PSI .........................................0.3 to 10 Bar
Speed ............................................................................................................................................ 1000 RPM
Plunger Diameter....................................................0.79” .................................................................... 20 mm
Stroke .....................................................................1.65” .................................................................... 42 mm
Crankcase Oil Capacity ..........................................
118 fl.oz.
............................................................3.5 liters
Temperature of Pumped Fluids ..............................140
o
F .....................................................................60
o
C
Inlet Port ........................................................................................................................................1-1/4” BSP
Discharge Port ..................................................................................................................................... 1” BSP
Crankshaft Mounting .....................................................................................................................Either Side
Shaft Rotation .............................................................................................. Top of Pulley Towards Fluid End
Weight ....................................................................119 lbs. ...................................................................54 kg
Crankshaft Diameter............................................................................................................................ 35 mm
*
Intermittent duty for pump speeds in excess of 805 RPM
Model LP600/LP600-4000 Specifications
