www.valuehobby.com/j3-90.html
Step4. Use thin CA to glue two wheel pants to the
landing gear leg.
Step5. Use four M4x16mm socket head screws and
four M4 nuts to install the landing gear to the
fuselage.
Section5. Wing Installation
Step1. Insert two 19x800mm joiner into the wing
panel.
Use epoxy glue the 9x135mm wing joiner into the
wing.
Step2. Attach the wind panel to the fuselage.
Step3. Use the M6 x 25mm nylon screw to secure
the wing panel to the fuselage.
Step4. Repeat step 1.2 and 3 to install another wing
panel to the fuselage.
