www.valuehobby.com/j3-90.html
Step7. Secure the hatch the wing using M2.3x8mm
screws.
Step8. Position the control horn on the aileron. Use
the pushrod wire as a guide to align the horn to the
servo arm. Position the horn so the holes align with
the hinge line. Use a felt-tipped pen to mark the
positions for the three mounting bolts.
Step9. Drill the locations marked in the previous
step.
Step10. Attach the control horn using three
M2x25mm socket head screws and control horn
backplate.
Step11. Attach the clevis to the control horn using
M2x10mm socket head screw and M2 nut.
Step12. With the control surface centered, tighten
the screw on the pushrod connector.
Step13. Repeat the previous steps to install the
other aileron servo.
