www.valuehobby.com/j3-90.html
Step4. Put the control horn in place on the elevator.
Use a felt-tipped pen to mark the positions for the
three mounting bolts.
Step5. Attach the control horn using three
M2x16mm socket head screws and control horn
backplate.
Step6. Install the clevis to the control horn using
one M2x10mm socket head screw and one M2 nut.
Step7. Use the same methods to install the rudder
servo control and attach the pushrod to the control
horn.
Step8. Prepare two standard servos with servo arm
and pushrod connectors installed.
Step9. Install the servos onto the servo openings.
Step10. With control surface centered, tighten the
screws on the pushrod connectors.
