User Manual
Turboloader
Page
25
©GF Gianni Ferrari Rev. 05
www.gianniferrari.com
For remove the attachment proceed in reverse mode : open the fixing pin and using the traverse of the telescopic
arm take out the fitting without come down of the machine.
For the attachments 2-side hedge trimmer and reach arm, it has been developed an additional safety hook, to avoid the
accidental unhook of the attachments from the frontal fitting plate. The hooking is automatic, approaching the fitting
plate to the attachment (picture
1
and
2
) and keep the lever
A
in the position showed from the
picture 3
. To unhook,
before to press the yellow button, raise the lever
A
, bring it in the position showed from the
picture 4
. then ,proceed
with the normal hooking procedure.
1
2
1
2
