User Manual
Turboloader
Page
20
©GF Gianni Ferrari Rev. 05
www.gianniferrari.com
1
Turning the lever we rule the hardness of the seat compatibly to the weight of the worker.
2
Pulling the lever we rule the distance from the seat to pedal and the steering wheel.
3
Pulling the lever we rule the slope of the back.
4
Vertical adjustment in 3 different settings. Carry out this operation when the operator is not seated, lifting the
seat a little then stop; to lower the seat, first lift it as high as it will go and then release.
It is allowed the use of the vertical setting only in the first position, because the machine, with 4-post ROPS or with
CAB is equipped also with FOPS structure.
MULTIFUNCTION JOYSTICK SERIES M and H
The hydraulic multifunction joystick commands the greatest part of the moves of the Turboloader, and it is
directly integrated with the guide position to avoid during the normal working operation some errors of move
that could bring damages to things/persons and/or animals presents in the ray of action of the machine.
The following picture shows the main functions.
1
Buttons to activate the big hydraulic frontal plugs:
Mode A big frontal plugs
Mode B little fontal plugs together the electrical frontal plug (only with 2-side hedgetrimmer and side reach
arm)
2
Button to activate the small hydraulic frontal plug
The function is activated pressing the button and mouving left or right the joystick
3
Button to activate the sliding arm:
The function is activated pressing the button and mouving left or right the joystick
Mouving the joystick toward right the telescopic arm comes out, toward left the telescopic arm comes back
4
The button has 3 positions:
In forward position is selected the transfer speed (only for H440-2S) and the butons 1 in Mode A
In central position is selected the work speed, and the buttons 1 in Mode A
In reverse position is selected the work speed and the buttons 1 in Mode B
5
Sensor of presence to activate the function of joystick
1
4
1
4
5
2
3
