User Manual
Turboloader
Page
16
©GF Gianni Ferrari Rev. 05
www.gianniferrari.com
9 – TRANSPORT
THE MOVING OF THE LOADER CAN ONLY BE EFFECTED WITH ENGINE TURNED ON
THROUGH HIS OWN CONTROLS .
The car if equipped of homologation for the road circulation, conforming to the in force legislation in the country
of use, can move to pubblic roads.
If it was unprovided it is Obligatory to enliven it through a fit (truck, towing etc.)
The machine may be transported either unpackaged or palletized.
It must be firmly fixed and fastened to the transporter loading platform.
Block the Loader using a handle brake. Block also the articulation joint using the equipment lock.
Effect the load and the unload of the Loader using and fixing homologated loading ramp at the mean of
transport. The slope of the ramp cannot be superior of 13° (see picture below).
If the machine is palletized, use a forklift.
FOR A PERFECT SAFETY BALANCING IS OPPORTUNE TO CLIMB ON THE RAMP WITH AT LEAST
ONE OF THE FITTINGS ATTACHED TO THE MACHINE
If there is not the possibility to use the loading ramp, lifting must be carried out by fixing suitable slings in 4 positions,
2 in the front side of the machine, and 2 on the rear side (see picture below).
H
M
