16
CONTROL PANEL – INSTALLATION AND USE
The remote control panel should be installed on a guide DIN in a wall-mount electric board; the
space encumbered corresponds to 6 modules.
The control panel includes 3 terminal strips for:
-
connection of the unit with 4 threads to feed the panel (24VDC) and enable serial
communication with the electronic card;
-
the digital inputs of the various functions;
-
the two digital relay outlets that activate a circulation pump and a failure signal.
MODBUS CONNECTION: the connection is carried out with 4 threads, 2 for the 24VDC supply
to the panel e 2 for serial communication. Use a shielded wire with a 0,5-sq. mm. section.
OUTLET RELAY
-
C01-NO1: 250V AC – 5A relay that activates when water circulation is required, useful
to control the pump.
-
C01-NO2: 250V AC – 5A relay that activates when a signal turns ON, useful to provide
an alarm signal from remote.
MBUS connection with the
machine
Outlet relay
Digital input
