Ghost Bike User Manual Download

Page: 71 / 132

GHOST

User Manual Status 04/2009 // Spec 2010

7.71

Shifting to a smaller sprocket:

•

You must pedal while shifting.

•

Press the lever until you feel an engagement and then release the lever
again immediately.

7.7

Using the brakes

Danger of personal injury and material damage!

Incorrect use of the brakes can lead to dangerous riding situations, falls,
accidents and material damage.

Familiarise yourself with the use of the brakes.

Find out which brake lever actuates the front wheel brake and which the
rear wheel brake.

To do this, press the respective brake lever several times while at
standstill.
You can observe the opening and closing of the brake blocks or brake
pads on the corresponding brake disc or wheel rim.

Pull the lever towards the handlebar to actuate the brake.

Summary of Contents for Bike





































































































































Search results

Summary of Contents for Bike

Reviews:

Related manuals for Bike

Brands by name

Popular brands

Ghost Bike, User Manual

Search results

Summary of Contents for Bike

Reviews:

Related manuals for Bike

Brands by name

Popular brands