Ghost Bike, User Manual

Page: 98 / 132

GHOST
User Manual Status 04/2009 // Spec 2010
10.98
•
To do this, raise the bike at the rear, actuate the corresponding switch and
turn the crank in drive direction by hand until the chain is engaged on the
smallest pinion.
3. On the front wheel with hub dynamo (if installed):
•
Disconnect the plug connector between dynamo and wiring.
4. Loosen the wheel hubs.
•
Open the quick-release lever on your wheel (see also chapter 7.9 “Quick-
release levers”).
•
Back off the lock nut until it is just still on the axle.
With other clamping systems:
•
Loosen the clamping system as described in the component user manual
supplied.
5. Remove the wheels from frame and forks.
•
Front wheel: Pick up the bike with the handlebars and pull the wheel out of
the fork ends of the front-wheel forks.
•
Rear wheel: Raise the bike at the rear end and push the gear shift
mechanism to the rear. In this position, push the rear wheel with alight
pressure towards the opening in the frame.