GHM DeltaOHM HD51.3D Series, Operating Manual

Page: 26 / 42

HD51.3D…
- 26 -
V2.0
Command Reply Description
RWaL & nnn| Reads the time interval for the calculation
of average speed and average direction set
in the instrument
CWaMn &| Sets the method for the calculation of
average speed and average direction:

If n=0: scalar average.

If n=1: vector average.
Default : vector average (n=1)
(see Note 4 )
RWaM & n| Reads the method for the calculation of the
average speed and average direction set in
the instrument
CWgLnnn &| Sets time interval for the calculation of av-
erages in Wind Gust measurement to nnn
value
Value should range within 1 and 100 s
Default : 3 s (standard WMO value)
(see Note 6 )
RWgL & nnn| Reads the time interval for the calculation
of averages in Wind Gust measurement set
in the instrument
CWgMn &| Sets the method for the calculation of
averages in Wind Gust measurement:

scalar average if n=0

vector average if n=1
Default : vector average (n=1)
Note: see the description of the command
CWaMn for the meaning of scalar average
and vector average.
RWgM & n| Reads the method for the calculation of av-
erages in Wind Gust measurement set in
the instrument
CWgOnnn &| Sets time interval for detecting the maximum
of the averages in Wind Gust measurement
to nnn value
Value should range within 1 and 600 s
Default : 60 s
(see Note 6 )
RWgO & nnn| Reads the time interval for detecting the
maximum of the averages in Wind Gust
measurement set in the instrument
CCn &| Enables/disables the compensation of wind
speed and direction with compass and tilt
angles measurements:
Disables if n=N
Enables if n=Y
Default : Enabled (n=Y)
RCU & n| Reads the enabling status of the compensa-
tion of wind speed and direction with com-
pass and tilt angles measurements