HD37AB1347
- 25 -
V3.0
4.
Press
ENTER
to confirm and return to the previous page, or press ESC to cancel
the change and exit the menu item;
5.
Press
ESC
over and over to exit from the submenus;
6.
Press
MENU
to exit immediately from the main menu.
WARNING: The communication between instrument and PC (or serial port
printer) only works if the instrument and PC baud rates are the same.
If the
USB connection is used, this parameter value is automatically set.
NOTE: When setting the baud-rate, check the printer speed.
P
RINT
I
NTERVAL
To set the
Print Interval
, proceed as follows:
1.
Use the arrows
▲▼
to select the item;
2.
Press
ENTER
: You will get the following message:
COMMUNICATION MENU
SERIAL
PRINT INTERVAL
h:mm:ss (1h max)
0:00:00
▼▲
set
<ESC> exit
<ENTER> confirm
3.
Use the arrows
▼▲
to set the value;
4.
Press
ENTER
to confirm and return to the previous page, or press
ESC
to cancel
the change and exit the menu item;
5.
Press
ESC
over and over to exit from the submenus;
6.
Press
MENU
to exit immediately from the main menu.
The print interval can be set from 0 seconds to one hour: 0 - 15 s - 30 s; 1 - 2 - 5 -
15 - 20 - 30 min.; 1 hour.
S
ETTINGS
To enter the
Settings
submenu, proceed as follows:
1.
press the instrument
MENU
key;
2.
Use the arrows
▼▲
to select
Settings
3.
press
ENTER
: the following message appears:
SETTINGS
1)Contrast
2)Backlight
3)Reset
▼▲
select
<ESC> exit/cancel
<Enter> confirm
