HD37AB1347
- 19 -
V3.0
2.
Press
ESC
to return to the
Logging
menu;
3.
Press
ESC
again to return to the main menu;
4.
Press
MENU
to exit immediately from the menu.
S
TART
/S
TOP
L
OG
–
A
UTOMATIC
S
TART
The logging start and end can be programmed by entering the date and time.
Set the logging start date and time using the arrows. Confirm the logging start date
and time using ENTER. Then you are asked to set the data to end the recording. Set
the logging end date and time using the arrows. Confirm the logging end date and
time using ENTER.
To enter this setting, proceed as follows.
Once you have accessed the
LOGGING
submenu (previous par.) use the arrows
▲▼
to select
Start/Stop Log
: The following message will be displayed:
START/STOP LOG
Insert date START
def.=5m>Actual Date
2010/02/10 08:05:00
◄►
select
▲▼
set
<ENTER> confirm
1.
Use the arrows
◄►
to select the data to be changed (year/month/day and
hour/minutes/seconds);
2.
Once selected, the data will start blinking;
3.
Use the arrows
▼▲
to change its value;
4.
Confirm by pressing ENTER;
5.
Press ESC to return to the Logging menu without making any change;
6.
Press ESC again to return to the main menu;
7.
Press MENU to exit immediately from the menu.
After setting the logging start time, the logging end time (Enter stop time) window will
be displayed:
START/STOP LOG
Insert END date
def.=10m>Start date
2010/02/10 08:10:00
Logging ends
at memory full
◄►
select
▲▼
set
<ENTER> confirm
