HD37AB1347
- 14 -
V3.0
S
TART OF A NEW LOGGING SESSION
Press
MEM
to start a
Logging
session: This key starts and stops the logging of a data
block to be saved in the instrument’s internal memory. The data logging frequency is
set in the
“Log Frequency”
menu parameter. The data logged between a start and
subsequent stop represent a measurement block.
When the logging function is on, the
LOG
indication
and the logging
session
number
are displayed; a beep is issued each time a logging occurs.
To end the logging, press
MEM
again.
The instrument can turn off during logging between one capture and the next: The
function is controlled by the
AutoPowerOff
parameter. When the logging interval is
less than 5 minutes, the logging instrument remains on; with an interval of at least 5
minutes, it turns off between one capture and the next.
