GHM Delta OHM HD50CR, Operating Manual

Page: 41 / 54

HD50CR
- 41 -
V1.0
Address Type Holding Register description
10093 W
Analog output 3 test register: the current output goes to the value, in
tenths of mA, entered in the register (e.g., enter 120 for 12.0 mA).
Set -1 to exit the test mode.
10094 W
Analog output 3 test register: the voltage output goes to the value, in
tenths of V, entered in the register (e.g., enter 50 for 5.0 V).
Set -1 to exit the test mode.
10095 W
Period, in minutes, of the auto-calibration of the zero of the differential
pressure
da 20000
a 20011
B User code with ASCII codification of the quantity #1.
da 20012
a 20023
B User code with ASCII codification of the quantity #2.
da 20024
a 20035
B User code with ASCII codification of the quantity #3.
da 20036
a 20047
B User code with ASCII codification of the quantity #4.
da 20048
a 20059
B User code with ASCII codification of the quantity #5.
da 20060
a 20071
B User code with ASCII codification of the quantity #6.
da 20072
a 20083
B User code with ASCII codification of the quantity #7.
Measurement alarm hysteresis and delay time
30002 B RH alarm hysteresis in % (x10).
30003 B RH alarm delay time in seconds.
30004 B D
EW POINT
alarm hysteresis in the set measurement unit (x10).
30005 B Dew point alarm delay time in seconds.
30010 B A
BSOLUTE HUMIDITY
alarm hysteresis in g/m 3 (x10).
30011 B Absolute humidity alarm delay time in seconds.
30012 B
W
ET BULB TEMPERATURE
alarm hysteresis in the set measurement unit
(x10).
30013 B Wet bulb temperature alarm delay time in seconds.
30084 B
D
IFFERENTIAL PRESSURE
alarm hysteresis in the set measurement unit (the
multiplier depends on the set unit).
30085 B Differential pressure alarm delay time in seconds.
30174 B
Alarm hysteresis for
TEMPERATURE
with 4-wire Pt100 sensor of the T/RH
combined probe in the set measurement unit (x100).
30175 B
Alarm delay time for temperature with 4-wire Pt100 sensor of the T/RH
combined probe in seconds.