GHL ProfiLux SMS-Module, Manual, Page: 5 / 8


State of the 4 digital inputs – if a voltage is present a checkmark will be indicated

Power cut – if no mains power supply is present a checkmark will be indicated

Today already sent – the amount of SMS messages which have been sent today so far

Firmwareversion and serial number
These settings can be adjusted:

Internal clock – the time in the SMS-module

SMS Service-Center – this phone number is used to send SMS messages; this field can be left empty if an
appropriate number is stored on the SIM-card; the number must be entered in international format (e.g.
+4912300000123)

SIM-PIN – the PIN for the SIM-card, if the SIM-card doesn’t require a PIN the checkmark must be removed

SMS transmission is enabled – if the checkmark is set the SMS-module is allowed to send SMS messages
automatically

Maximal SMS per day – this amount determines how many SMS messages may be sent in one day maximal; after
reaching this amount the SMS transmission will be disabled for this day; this function protects you against unlimited
transmission of SMS messages, e.g. caused by an alarm which comes and goes frequently
5.3 SMS Message
Up to 30 different SMS messages which will be sent after a specific event can be defined. In order to define a new SMS
message please click
New… , an existing SMS message can be edited, deleted or duplicated by clicking Edit… , Delete… or
Duplicate… .
Figure 4 – Example for send condition call