GHL ProfiLux SMS-Module, Manual, Page: 4 / 8

Figure 2 – Example for connection settings
Hints:

If no SMS-module is present you should remove the checkmark, otherwise the connecting will take longer.

A ProfiLux must be connected; otherwise it is not possible to establish a connection.

The baud rate of the connected ProfiLux and of ProfiLuxControl must be set to 9600.
5.2 General settings
After clicking Connect the entry SMS-module will appear in the left navigation pane (assuming it is connected and switched
on). Select this entry.
Figure 3 - Overview
This is displayed:

Table with all defined SMS messages (in the example still empty)

Battery – charge state of the lithium-ion-battery

Status – operational state
set checkmark here