GGMgastro WKM335SN, User Manual

Page: 7 / 16

ENG
6
In order to connect the device to the sewage system, appropriate sanitary elements should be
fitted to the siphon installed in the device, which enables attaching it to the drain. After connecting
the device to the sewerage network, check the connections for leaks.
Device siphon.
Attention! Before carrying out any maintenance, turn off the cooling rack from the mains
(disconnect the plug from the socket by holding the socket with the other hand).
2.3 STORAGE OF PRODUCTS IN THE DEVICE
Before brewing, run the empty device and leave it working until the desired temperature is
reached. Once it has been reached, you can start to load the goods. When stacking goods
on shelves, leave space between them to allow air to circulate inside the device. Do not place
non-refrigerated products in the device. In the event of a power failure of the device, all products
should be emptied. If the device will not be used for a longer period of time, disconnect it from
the mains, empty, wash and leave the door ajar.
2.2 CONNECTION OF THE SEWING MACHINE.
During the cyclical defrosting process, the ice accumulated on the evaporator of the device melts.
The water created as a result of the process must be removed from the device. The place of re-
moving water is the siphon located under the device.
Users manual - Wall cooling shelf