ENG
9
3. MAINTENANCE OF THE APPLIANCE
3.1 CLEANING THE DEVICE.
Attention! Before carrying out any maintenance, turn off the cooling rack from the mains
(disconnect the plug from the socket by holding the socket with the other hand).
Attention ! Protect the device from water. Do not use a water jet for cleaning. Protect the
electrical installation of devices from moisture.
Use a damp cloth to clean the device.
Cleaning of sharp objects is forbidden.
It is not allowed to use chemically active substances, in particular those containing chlori-
ne, soda and other destructive protective layers and elements of the device.
This also applies to stainless steel.
3.2 CONDENSER CLEANING (Version with internal unit)
Keeping the condenser clean is essential for the proper operation of the refrigeration unit.
Contamination of the condenser causes a change in the heat exchange characteristics, which
increases the consumption of electricity, and the compressor may also fail.
The condenser should be cleaned at least once every 2 months. If
the condenser gets faster, the processing process should be more
often.
Contamination of the compressor on the condenser is dirty
and as a result, an emergency device, which is not a guarantee!
Attention! Before carrying out any maintenance, switch off the device from the mains
(disconnect the plug from the socket by holding it with the other hand).
Users manual - Wall cooling shelf
Summary of Contents for WKM335SN
Page 1: ...ENG USERS GUIDE WKM335SN...
Page 14: ...ENG 14 NOTES Users manual Wall cooling shelf...
Page 15: ...ENG 15 NOTES Users manual Wall cooling shelf...
Page 16: ......