ENG
8
1. Display with the current temperature inside the device.
2. SET / MUTE button
3. UP / ON OFF button
4. DOWN / DEFROST button
5. Diode No. 5 - when it is lit, it informs about the work of the compressor. During the blinking
cycle, two blinks indicate that the continuous operation mode has been activated. The flashing
LED indicates a delayed start (protective procedure).
6. Diode No. 6 - when it is lit it informs about activating the device defrosting function. The fla-
shing diode informs about the delay of the defrost cycle (from the outside of the external
switch-off or starting in the course of another procedure).
7. Diode No. 7 - when it is lit it indicates the active alarm function.
8. Diode No. 8 - when it is lit, informs about turning on the fans installed on the device’s evapo-
rator. The flashing diode informs about the start delay of the fans (from the external switch-off or
start-up in the course of another procedure).
FOR THE SETTING OF THE REQUEST TEMPERATURE YOU MUST:
1. Press for 1 second
, thermostat display will show the currently set temperature.
2. To reduce or increase it, use
or
for obtaining the desired value.
3. To confirm the changes and save them in the thermostat memory, press again.
.
MANUAL FORWARDING THE DEFENSE CYCLE:
The defrost cycle is carried out in the device in an automated way. The user can
force the device to defrost. To do this, press and hold for 5
second button.
In order to speed up the defrosting process, it is not allowed to use other mechanical means than
those recommended by the manufacturer.
Users manual - Wall cooling shelf
Summary of Contents for WKM335SN
Page 1: ...ENG USERS GUIDE WKM335SN...
Page 14: ...ENG 14 NOTES Users manual Wall cooling shelf...
Page 15: ...ENG 15 NOTES Users manual Wall cooling shelf...
Page 16: ......
