Using the REVO Spot Unit for Body Filler:
1. Mix and apply the body filler.
•
Be sure to mix your body filler properly!
Many people put too much hardener in the
filler. Follow the directions on the can. Too much hardener can cause pinholes or
bubbling.
•
Automix filler systems are recommended to ensure mixing accuracy.
•
Always use two part fillers and putties. One part
glazing putties and fillers are not compatible with
REVO.
2. Place Spot unit about 2 feet away from the area
to be cured.
3. Position the cassette parallel to the curing area
(
Picture 1
).
4. Set the time and temperature controls in accordance with the decal on the machine
(
Picture 2
).
5. Press the green
Start
button and the Spot unit will begin curing.
•
When the target temperature is achieved the lamp will flicker to maintain proper
temperature.
•
When the curing cycle is complete the lamp will automatically shut off.
6. When the panel has returned to ambient temperature you can begin sanding the body
filler.
•
Cooling can be accelerated by
using a blow gun to force air over
the panel.
BODY FILLER
9