Using the REVO Spot Unit for Etch Primer:
1. Mix and apply the etch primer.
•
Be sure to use a two part etch primer.
1K aerosol products are not meant to handle
heat and do not having good etching qualities.
2. Place the Spot unit about 2 feet away from the area to be cured.
3. Position the cassette parallel to the curing area
(
Picture 1
).
4. Set the time and temperature controls in accordance
with the decal on the machine (
Picture 2
).
5. Press the green
Start
button and the Spot unit will
begin curing.
•
When the target temperature is achieved the lamp
will flicker to maintain proper temperature.
•
When the curing cycle is complete the lamp will automatically shut off.
6. When the panel has returned to ambient temperature you can begin applying topcoats.
•
Cooling can be accelerated by using a blow gun to force air over the panel.
ETCH PRIMER
10