CLEARCOAT
Using the REVO Spot Unit for Clearcoat:
1. Mix and apply all coats of clearcoat per manufacturer’s recommendations.
•
There is no need to cure with REVO between coats.
•
Only use slow or medium hardeners and reducers!
•
Be sure to use a “Baking Clearcoat.”
Air dry clears are not designed to handle heat
and curing them with REVO could result in solvent popping or bubbling.
2. Place Spot unit about 2 feet away from the area to be cured.
3. Position the cassette parallel to the curing area (
Picture 1
).
4. Set the time and temperature controls in accordance
with the decal on the machine (
Picture 2
).
5. Press the green start button and the Spot unit will
begin curing.
•
When the target temperature is achieved the
lamp will flicker to maintain proper
temperature.
•
When the curing cycle is complete the lamp
will automatically shut off.
6. When the panel has returned to ambient temperature you can begin assembling parts or
start the buffing process.
•
Cooling should not be accelerated, let it cool naturally.
13