WARNING
Isolate the outdoor vent from air-conditioning intakes, windows, and any other equipment that may re-
circulate the exhaust indoors.
WARNING
Turn on the exhaust fan before using the spray booth. Ensure that the exhaust fan is operating correctly
before entering the booth.
WARNING
Check local codes to see if a booth interlock is required. A booth interlock prevents the spray devices from
operating unless the booth fan is operating.
WARNING
Some spray activities may require the use of respiratory protection.
WARNING
Use an OSHA-approved paint spray respirator when spraying in the booth.
WARNING
This equipment is designed for the removal of particulate matter only. Reduction of volatile organic
compounds (VOCs) requires either coating reformulation or optional, additional equipment.
WARNING
Fall Hazard: Do not walk or drive over the pit without the bar grating in place.
WARNING
Fall Hazard: Do not drive over the bar grating in a vehicle that exceeds the maximum wheel load listed in
the Bar Grating Specification table on the Pit Details page of the Design Drawings.
WARNING
Fall Hazard: Do not remove bar grating from the pit unless authorized to do so. The pit presents a fall
hazard when the bar grating is not installed.
CAUTION
Become familiar with all controls before operating or servicing this booth.
CAUTION
Proper door alignment is critical to the operation of the booth. Ensure that there is equal space around the
doors. Move the bottom of the door jamb to the left or right or in and out until the doors are sealed and
plumb.
Booth safety
Global Finishing Solutions
9
239-062 rev 5
