11
6
Electrical installation
Warning – Danger to life due to electrical current!
Disconnect the cables (mains OFF) and check that the supply is off
Observe applicable regulations and standards
Ensure proper electrical connection
Use suitable tools
The integrated safety switch of the safety brake functions as an NC contact. Connect the
cable of the safety switch to the EMERGENCY STOP input of the door control. When the
safety brake is activated, the electrical circuit is interrupted and the electrical operation of the
gate is no longer possible.
Carrying out the electrical installation
Cable of the safety brake's safety switch (
➊
) Connection of the cable to the
EMERGENCY STOP input of the door
control (
➋
)
Warning – Injury or danger to life possible!
The safety switch of the safety brake must not be connected to the drive unit.
Completing the electrical installation
Install cable entries and/or cable glands.