background image

 

 

QUICK CONSUMER 
REFERENCE GUIDE

YOUR System: ADT Alarm Garda Response

Starting to use the PM30 Alarm Panel and Keypad 

1

Setting Your System

Step 1

When leaving your home ensure that all protected doors/windows, including your 

front door, are closed before setting your System.

Step 2

Set your System by:

Option 1:

The Keypad – by pressing the “set” key          and presenting your KeyTag /or 

entering your 4-Digit User Code.

Option 2:

The Alarm Panel – by pressing the “set” key         on the Alarm Panel and entering 

your 4-Digit User Code.

Step 3

You will hear a continuous beeping to remind you to leave the property via your 

specified exit route. Your System will set only once the exit door is closed.

Step 4

The beeping stops and your System is now successfully set.

 

As a security feature, the status of your System is hidden from view

• To start using your System, push the “unset” key        on your Alarm Panel and enter  

   your 4-Digit User Code or tap the screen on the Keypad.

• The Alarm Panel/ Keypad is now lit and you are ready to start using your System.

PM30 Control Panel

KeyTag

Touchscreen Keypad

Summary of Contents for Garda Response PM30


















Reviews: