Operating instructions Clamping device Topload
1 Safety instructions
3
1 Safety instructions
The toploader is designed in accordance with modern technical practices. Any
use for another purpose other than that described in this instruction may lead
to personal injury either to the operator or to third parties. In addition, damage
may be caused to the equipment or other objects.
Thus:
•
Only use the equipment when in perfect technical condition and follow all
safety instructions very closely.
•
Keep these instructions complete and together with the equipment.
•
All generally recognised accident preventative measures must be
observed at all times.
1.1
Proper use
•
Clamping device Topload 400
–
ELGEF Plus electrofusion saddles for dimension d 280 mm – 400 mm
with outlet d63 mm
•
Clamping device Topload 630
–
ELGEF Plus electrofusion saddles for dimension d 280 mm – 400 mm
with outlet d63 mm
–
ELGEF Plus Branch fitting for dimension d 280 mm – 630 mm with outlet
d90/110/125 mm
•
The operator is wholly responsible for all damage or injury caused by the
use of the equipment for purposes other than those intended.
1.2
General safety measures
•
Only use the dimensions and materials mentioned in this instruction.
Other materials may only be used after consultation and agreement from
the Georg Fischer Support Service.
•
Only use original replacement parts and materials from Georg Fischer.
•
The equipment should be checked daily for any optical signs of damage
and defects. Damage and defects are to be remedied immediately.
