3 Preparation and Assembly
Operating instructions Clamping device Topload
6
3 Preparation and Assembly
3.1
Preparation
For the fusion angle adapters (4 mm) are required
(Codeno. 799350340).
CAUTION
Defective fusion connection
Insufficient preparations can lead to a defective fusion
connection.
1. Clean working area on the PE pipe roughly.
2. Peel the PE pipe with a rotary peeler. Note min. shaving thickness of 0.2
mm as well as the min. allowable outside pipe diameter.
We recommend the use of Rotary peeler "RS" (Code-no. 790136014 for
d280 respectively 790136015 for d315) or the Peeling tool "RST 1000"
(Code-no. 799300799) for sizes d355 and above.
3. Clean pipe only in the peeled area with Tangit PE cleaner and lint-free,
colorless and clean cloth in circumferential direction, let the cleaner
exhaust. Do not touch the fusion zone and avoid contamination.
Important
2
3
