Flow rate setting
for 4 mA output
OUTPUT
Flow rate setting
for 20 mA output
CAL
K-factor
Totalizer
Resolution
Flow display
averaging
Flow display
decimal pt.
Relay 1 LO, HI,
or Pulse
Relay 1
setpoint
Relay 1
hysteresis
RELAY
Relay 2 LO, HI,
or Pulse
Relay 2
setpoint
Relay 2
hysteresis
Output view-only menu: 4 to 20 mA (iso/non-iso) output option illustrated
Relay view-only menu: 2-Relay LO/HI output option illustrated
Main (CAL) view-only menu: Frequency (iso/non-iso) input option illustrated
3.7 View-Only Menus
Three "view-only" menus (CAL, RELAY, and
OUTPUT) are available during normal operation.
Each view only menu provides the operator a
means of browsing through calibration settings
without disturbing system calibration and/or the
flow process. When used in conjunction with the
security feature, the view only menus allow an
operator access to limited calibration information
on the front display, excluding the ability to
change system parameters without the supervisors
approval and personal security code.
Access each of the three view only menus by
pressing the corresponding menu key. After
entering each of the three view only menus, each
calibration parameter is sequentially displayed on
the main and lower displays by successively
pressing it's corresponding menu key as follows:
Exiting Menus:
Exit view
only menus at any time by
pressing:
FLOW
Note:
The view-only menus
are designed for viewing only
and DO NOT permit access
for calibration of any kind.
Menus will vary depending
upon installed options.
18
