manualshive.com logo in svg

GEZE Slimdrive SLT, Installation And Service Instructions Manual, Page: 7 / 36

Share
Download
GEZE Slimdrive SLT Installation And Service Instructions Manual Download Page 7

Slimdrive SLT product family

7

Overview

4 

Overview

4.1  Diagrams

Number

Type

Name

70487-0-007

Drive drawing

Slimdrive SLT, drive

70487-0-010

Dimensioned drawing

Slimdrive SLT/SLT-FR 2M

, 4-leaf with rod locking

70487-ep01

Installation diagram

Slimdrive SLT / -FR 2 M, insulated glass doors, post-rail construction

70487-ep06

Installation diagram

Slimdrive SLT with floor lock

70487-ep07

Installation diagram

Slimdrive SLT/SLT-FR 2M

 with IGG

70487-ep10

Installation diagram

Slimdrive SLT/SLT-FR 2M

 ISO, Lock M, post-rail

70487-ep20

Installation diagram

IGG profile system

70487-ep21

Installation diagram

2-leaf, left-hand side, 1-leaf, left hand slide to open

70487-ep22

Installation diagram

2-leaf, right-hand side, 1-leaf, right hand slide to open

70487-ep27

Installation diagram

Wooden leaf

70487-ep40

Installation diagram

ISO with rod locking

70715-9-9818

Installation diagram

Continuous floor guide SL + SLT

70484-ep04

Installation diagram

Safety leaf for sliding door drives

70484-ep15

Installation diagram

Protective leaf mounting

70717-ep02

Installation diagram

Slimdrive SLT, ISO self-supporting girder section

70717-ep04

Installation diagram

Slimdrive SLT, girder section lintel installation

70717-ep08

Installation diagram

Slimdrive SLT, self-supporting girder section Lock M

70717-ep09

Installation diagram

Slimdrive SLT, girder section lintel installation Lock M

70484-2-0572

Component drawing

Cover, bespoke SL/SLT

70484-2-0574

Component drawing

Track, bespoke 

70484-2-0467

Component drawing

Track 6500 and 4500 mm - 2-leaf - with rod locking

70484-2-0575

Component drawing

Track, bespoke - 2-leaf - with rod locking 

70484-2-0691

Component drawing

Track, bespoke - 1-leaf - with rod locking 

70715-1-0159 

Assembly group drawing

Floor guide continuous

70715-9-9837

Installation drawing

SLT insulated glass leaf

70717-9-0967

Installation drawing

SL/ SLT side panel

The diagrams are subject to change without notice. Use only the most recent version.

4.2  Tools and aids

Tool

Closer size

Tape measure
Marking pen
Torque spanner
Allen key

2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm

Open-ended spanner

8 mm, 10 mm, 13 mm, 15 mm, 13 mm flat (GEZE specialised tool)

Ring spanner

8 mm

Screwdriver set

Floor guide slit up to 6 mm, cross-slot PH2 and PZ2

Torx key

TX 20 (bit insert length at least 110 mm)

Side-cutting pliers
Crimping pliers for cables
Wire stripper
Multimeter
Display programme switch/Service terminal ST 220/GEZEconnects

Summary of Contents for Slimdrive SLT





































Reviews:

No comments