Slimdrive SLT product family
22
Installation
5.6 Setting the stop buffer
During installation, the rubber buffers must point in the direction of the middle of the track.
X
Undo the setscrew (2) on the stop buffer (1).
X
Slide the moving leaf to the open position.
X
Slide the stop buffer (1) on the roller
carriages.
X
Tighten the setscrew (2) using the Allen key
(torque 3 Nm).
5.7 Installing cable guides
Cables can be cut!
X
Lay cables in such a way that there are no cables near the moving parts.
X
Mount the cable guide (1) on the track (2), distance approx. 200 mm.