Slimdrive SLT product family
12
Installation
5.4 Installing the moving leaf
5.4.1 Install the door suspension plates on the moving leaf
The door suspension plates are installed during glazing of the moving leaves. In case of subsequent installation
of the door suspension plates, the frames of the moving leaves must be dismantled (see installation instructions
for moving leaves).
See the installation drawing for the moving leaf for the position of the bracket support (distance x, y and overhang).
Installing the door suspension plates
View from the side
Moving leaf
inner
Moving leaf
outer
View from above:
1
2
3
4
3
3
1
Door suspension plate
2
Screws
3
Secondary closing edge
4
Main closing edge
X
Screw the door suspension plates (1) to the moving leaf using screws (2).
X
Do
not
tighten the screws yet.