Getinge 8666, Service Instructions Manual

Page: 46 / 135

Fault indications and troubleshooting 9
Service instructions
5015108-00 Edition 0403
Fault code Fault Comment
F31 Faulty temperature sensor in washing chamber Independent. The temperature (-B07) is <0 °C or >130 °C.
Possible action:
a. Check the temperature sensor (for open-circuit or short-circuit)
F32 Faulty temperature sensor in dryer The temperature (-B05) is <0 °C or >130 °C.
Possible action:
a. Check the temperature sensor (for open-circuit or short-circuit)
F33 Incorrect temperature in washing chamber Wash temperature (-B07) has not risen by at least 10 degrees C after eight
minutes’ washing.
Possible action for electrically heated machine:
a. Check that there is power on all phases up to the elements.
b. Check the overheat protection of the elements.
Possible action for steam heated machine:
a. Check the steam valve.
b. Check that the ball valve is open and that the filter in the incoming steam is clean.
c. Check steam pressure (see installation instructions).
d. Check condensate drain.
e. Check that there is no back pressure in the condensate drain.
F34 Faulty temperature sensor in washing chamber Wash temperature (-B07) dependent and independent differs by more than ±3
degrees C.
Possible action:
a. Check the calibration of the temperature sensor (see Calibration under
Repair and adjustment)
b. Check the temperature sensor.