Getinge 8666, Service Instructions Manual

Page: 30 / 135

Software description and settings 6
Service instructions
5015108-00 Edition 0403
Passwords
There are five passwords with different levels of authorisation in the system program. The
operator password has the lowest authority; the programming password has full authority.
The following password levels are as follows:
• Operator – code 558387.
• Parameter – contact service for code.
• Supervisor – contact service for code.
• Service – contact service for code.
• Programming – contact service for code.
NOTE: In the menu tree where the password must be entered there is a letter
code (between PW: A-K) which refers to the function for which the relevant
password is authorised.
When a password is entered, the top line shows “ENTER PASSWORD”. Press
S
to open the
entry field for editing . Each number can be changed with
J
and
H
.
I
and
K
toggle
between the numbers. Press
S
to confirm the entered password.
If the wrong password is entered, “WRONG PASSWORD” appears on the first line. Press S to
return to the display showing “ENTER PASSWORD”
NOTE: The password cannot be changed.
Operator
Code in Authority to change
menu tree
A Parameters of type A and to see parameters of type I.
Parameters
Code in Authority to change
menu tree
A Parameters of type A and to see parameters of type I.
H Process-critical configurations, parameters of type P.
Supervisor
Code in Authority to change
menu tree
A Parameters:
B Calendar (time and date)
H Process-critical configurations, parameters of type P.
J Password configuration
K Documentation