Gestetner G056, Service Manual

Page: 321 / 335

ENGINE FIRMWARE HISTORY
G056/G058 5-22 SM
G056/G058 NIB FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION FIRMWARE
LEVEL
SERIAL
NUMBER
FIRMWARE
VERSION
Firmware modified to correct the following:
1. The spelling of the display for Job
Interrupt in prnlog was change from
“Cancelled” to “Canceled” to conform to
Ricoh MIB (standards).
Added the error message “Can not write
NVRAM information”. This message appears
if an error occurs when saving the printer
status data to the NVRAM
.
G0585910 F June 2000
production
1.53
Firmware modified to corrects the following:
1. When using Signature level 2 on the
NetWare Server, the printer does not
connect to the NetWare Server.
2. When printing out using a CICS
application from an IBM mainframe (e.g.
AS/390), the printer is only able to output
one job due to the lpd protocol that is
unique to CICS.
3. When 50 or more lpq/lprm commands
(w/arguments) are executed from the
time the printer is turned on, the lpd
process at the printer side is interrupted
and the job is not printed out.
G0585910 G September 2001
production
1.54
Firmware modified to corrects the following:
1. SNMP
vulnerability
SNMP security vulnerabilities reported
by CERT on Feb.12, 2002 have been
confirmed and fixed through the
PROTOS c06-snmpv1 test suite.
-CERT:
http://www.cert.org/advisories/CA-2002-
03.html
-PROTOS c06-snmpv1 test Suite:
http://www.ee.oulu.fi/research/ouspg/prot
os/testing/c06/snmpv1/
2. Cannot connect to Novell NDS (GFPR
No. RC02010007). The nearest NetWare
Server informs the NIB of the alternate
NetWare Server address, where the
NDS replica is stored, however the NIB
is unable to interpret the message.
3. Firmware corrected so that the LCD
displays “Printer is not ready” when the
printer is not yet in Ready status, e.g.
when the cover is open.
G0585910 H For Service
Parts only
1.56
⇒
Rev. 12/2002