manualshive.com logo in svg

Gestetner G056, Service Manual, Page: 224 / 335

Share
Download
Gestetner G056 Service Manual Download Page 224

DIFFERENCES FROM THE MODEL G056/G058

SM

3-1

G073/G074

Rep

lac

emen

t

an

d

Ad

ju

s

tm

e

n

t

3.  REPLACEMENT AND ADJUSTMENT

All replacement and adjustment items are the same as the base model
(G056/G058), except for the item explained below. Please refer to the base model
(G056/G058) service manual for details about replacement and adjustment.

3.1  DIFFERENCES FROM THE MODEL G056/G058

The following item has been changed from the model G056/G058.

Please note that the position of the thermistor attached to the laser unit has been
changed.

NOTE: 

The thermistor is included in the laser unit.

Removing the Laser Unit

Refer to the model G056/G058 manual for
removal steps for the following items.

Operation panel (

☛

 3.2 Exterior Covers)

Upper cover (

☛

 3.2 Exterior Covers)

Left cover (

☛

 3.2 Exterior Covers)

[A]: 

230V machine only:

 Sheet (

!

 x1)

[B]: Thermistor ( 

"

 x1)

[C]: Clip
[D]:  Laser unit (

!

 x4, 1 flat cable, 

"

 x2)

G073R730.WMF

G073R203.WMF

[A]

[B]

[C]

[D]

Summary of Contents for G056
















































































































































































































































































































































Reviews:

No comments