Gestetner DSm755, Use

Page: 47 / 128

Installing the Printer Driver Using IEEE 1394 (SCSI print)
39
1
Windows XP, Windows Server 2003
Important
❒
SCSI print must be set to "active" from the control panel. For details, see Net-
work Guide.
❒
Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒
When the printer driver is properly installed, connecting or disconnecting the
optional IEEE 1394 cable causes the printer icon to change.
A
Connect the machine and computer using the IEEE 1394 interface cable.
When the [ Found New Hardware Wizard ] dialog box appears, check that [ This wiz-
ard helps you install software for: (Unknown) ] is displayed.
B
Select the [ Install from a list on specific location (Advanced) ] check box, and then
click [ Next > ] .
C
When the message "Please choose your search and installation option." ap-
pears, select the
[ Search for the best driver in these locations. ] check box, select
the [ Include this location in the search: ] check box, and then select the [ Include
this location in the search: ] check box.
D
To disable Auto Run, press the left
{
Shift
}
key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
If Auto Run starts, click [ Cancel ] , and then [ Exit ] .
E
Specify the location where the source files of the printer driver is stored,
and then click
[ Next > ] .
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• PostScript 3
D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1\
When installation is complete, the printer connected to "1394_00n" appears in
the
[ Printers and Faxes ] window. ("n" shows the number of printers connected.)