Gestetner DSm755, Use

Page: 46 / 128

Windows Configuration
38
1
G
Select the printer driver you want to use.
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• PostScript 3
D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1\
H
Click [ Open ] .
I
Click [ OK ] .
J
Follow the instructions.
When installation is complete, the printer connected to "1394_00n" appears in
the
[ Printers ]
window. ("n" shows the number of printers connected.)
Note
❒
If [ Found New Hardware Wizard ] appears every time the computer is started
or the cable is connected, disable the device. To install another printer driv-
er after setting the "1394_00n" port, click
[ 1394_00 ]
as a port during the
printer driver installation.
❒
If the printer driver has already been installed, the printer icon is added to
the
[ Printers ]
window. In this case, printer driver installation is not neces-
sary.
❒
If printing does not work properly after the installation, delete the port and
reinstall the printer driver. For details, see "When You Cannot Print", Trou-
ble Shooting.
Disable the device
If you do not want to install the printer when Found New Hardware Wizard
starts under an operating system that supports SCSI print, disable the device by
following the procedure below.
A
When the [ Found New Hardware Wizard ] dialog box appears, click [ Next > ] .
B
When the message "This wizard will complete the installation for this De-
vice: Unknown" appears, select the
[ Search for a suitable driver for my device rec-
ommended ]
check box, and then click
[ Next > ]
.
C
When the message "Please choose your search and installation option." ap-
pears, clear all check boxes from
[ Search for the best driver in these locations. ] ,
and then click [ Next > ] .
D
When the message "Driver Files Search Results" appears, select the [ Disable
the device. The Add/Remove Hardware Wizard in the control Panel can be able to com-
plete the driver installations.
] check box, and then click [ Finish ] ."