Gestetner CP6244, Operating Instructions Manual

Page: 93 / 548

User Tools Menu
75
3
4 Mode Setting
No. Mode Description
1 Auto Cycle
ON/OFF You can select to have Auto Cycle mode as either “ON” or “OFF”
when the power is turned on.
Note
❒
Default: ON
2 Ignore Paper Size If you are making prints on paper of custom sizes, you can set pa-
per size detection to “Ignore”.
Note
❒
Default: Do not Ignore
3 No Orig.
Size(ADF) If you are setting long originals in the optional document feeder
(ADF), you can set original detection to “Ignore”.
Note
❒
Default: Do not Ignore
4 Background
ON/OFF When you make prints in Photo, Letter/Photo, or Tint mode, the
background of the prints might appear dirty. In this case, you can
select “Back. Correction” to improve the clarity of your prints.
Note
❒
Default: W/O back. correction
5 Longer Paper You can select “Use” to allow the use of paper longer than
432mm, 17.0".
Note
❒
Default: Do not use
6 Combine/Repeat You can choose to have either Combine or Repeat selected by de-
fault when the power is turned on.
Note
❒
Default: Use (Combine)
7 Cancel Comb. You can specify whether Combine/Repeat mode will be auto-
matically cleared after you have finished your print job.
Note
❒
Default: Do not cancel
8 No. of Skip Feed You can specify the number of times that the drum rotates when
in Skip Feed mode. You can also choose whether or not to change
the number of drum rotations temporarily when you press the
{{{{
Skip Feed
}}}}
key. See p.52 “Skip Feed Printing”.
Note
❒
Default:
• Number of Skip Feed: 2