Gestetner CP6244, Operating Instructions Manual

Page: 274 / 548

Appendix
110
7
❖
❖ ❖
❖
When using rsh, rcp, ftp
At the beginning of the message, the IP address is displayed in parentheses.
Can't build data connection: “message” Cannot establish a connection for data trans-
fer due to the displayed error. Check the ftp
of the workstation that requested the print
job, and start it again. When using ftp, this
message remains only on the system log in-
formation.
cmd_name:Command not supported The remote shell command using cmd_name
is not supported. You should use only the
print, stat, syslog and info, commands. You
should access the machine only with rsh and
rcp remote shell commands.
command line too long The command line is too long.
file_name:No such file or directory You must use a file name with the srat, sys-
log, info and instal commands.
filter data error Some of the data cannot be handled with the
filter option. Confirm the file code and the
settings of the filter option.
get log busy Another machine is getting the log informa-
tion. You should get it afterwards.
lost connection The connection was cut by the other party.
Check the ftp of the workstation that re-
quested the print job, and start it again.
When using ftp, this message remains only
on the system log information.
no more ftp execute More than three users at a time cannot log in
using ftp. Since there are three other users
that have already logged in, wait until the
job is finished.
print requests full Cannot accept the print request.(max. five
sessions) Confirm the status of the machine
with lpq, rsh, rcp, and ftp commands, and
print it again after the number of print re-
quests (sessions) becomes less than five.
However, the maximum request when using
ftp command is 3.
printer busy Cannot get the machine information. Anoth-
er user may be accessing it. Wait a few min-
utes before trying again.
printer permission denied Cannot get a permission to use the machine.
Confirm the access right with the access con-
trol address and the access control mask.
printer refuse Something is wrong with the machine. Con-
firm the status of the machine.