Gestetner CP6244, Operating Instructions Manual

Page: 48 / 548

Operation
30
1
Edge Erase
When printing from thick books, or
similar originals, a shadow caused by
the binding may show up on the
prints. If you print using the Edge
Erase mode, such shadows will be
erased automatically.
❖ ❖ ❖ ❖
With Edge Erase mode
❖ ❖ ❖ ❖
Without Edge Erase mode
Note
❒
You can specify within a range of 0
to 20mm, 0" to 0.8", the width of
the margin to be erased. See “5
Margin Eras.Area” on p.74 “3 Ini-
tial Setting”.
❒
The default is 5mm, 0.2".
AAAA
Press the
{{{{
Edge Erase
}}}}
key.
BBBB
Use the
{{{{ ~
~ ~
~ }}}}{{{{ }
} }
} }}}}
keys to select the
original size and orientation, and
then press the
{{{{
OK
}}}}
key.
CCCC
Set your original.
DDDD
Enter the number of prints with
the number keys.
EEEE
Press the
{{{{
Start
}}}}
key.
Printing starts automatically after
the trial print.
Note
❒
If you wish to check the image
before printing, press the
{{{{
Auto
Cycle
}}}}
key before pressing the
{{{{
Start
}}}}
key, in order to disable
Auto Cycle mode. See p.17
“When Auto Cycle mode is off”.
GRERAS0E
A B A B
GRERAS1E
A B
ZLKS082N
ZLKS032N
ZLKS030N