Gesswein 510-2245, Instruction Manual

Page: 8 / 12

5
5.
Operating Procedure
With your New SZX Profiler adjusted for stroke and with a selected tool fitted, con-
nect the Gesswein Power Hand Controller to an electrical supply and the Profiler to
controller.
Set the Slide Rheostat on the Controller to “Low” or the “0” position. Put the Controller
Main Switch to the “ON” position, which lights up a pilot light that indicates your New
SZX Profiler is ready to use.
To increase the speed of the New SZX Profiler, move the Slide Rheostat toward High
or “10” and the desired reciprocating frequency. You can now begin working. When
work is completed, put the Main Switch to “OFF.”
To operate your handpiece using the optional Variable-Speed Foot Rheostat or
optional On/Off Foot Switch, please refer to the Power Hand 2X Controller Instruction
Manual for proper connection. The handpiece will not run until the foot rheostat/switch
is depressed. The rheostat provides infinitely variable speed control; the switch only
turns the handpiece on and off (operates at speed selected on controller).
8
New Z-SZX Parts List
When ordering spare parts, always specify part# (or item# if applicable) and
description.
Part# Item# Description
Z-SWX-101 8960230 Top Cover
Z-SWX-102 8960231 Oval Countersunk Set Screw
Z-SWX-200 8960232 Swing Arm Complete
Z-SWX-201
8960233
Swing Arm Support B
Z-SWX-202
8960234
Swing Arm
Z-SWX-203
8960235
Tool-Securing Screw
Z-SWX-204 8960236 Swing Arm Support A
Z-SWX-300 Eccentric Shaft Complete
Z-SWX-301 8960156 E-Type Clip Ring
Z-SWX-302
5103076
Ball Bearing
Z-SWX-303
8960238
Eccentric Shaft
Z-SWX-400
8960241
Main Shaft Complete
Z-SWX-401 8960242 Main Shaft
Z-SWX-402 8960067 Coil Spring
Z-SWX-403 5100151 Nylon Coupler (Joint)
Z-SWX-404 8960068 C-Type Clip
Z-SWX-405
8960243
Plastic Spacer
Z-SWX-406
5103079
Ball Bearing
Z-SWX-407
8960244
O-Type Rubber Ring
Z-SWX-408 8960245 Bearing Spacer
Z-SWX-409 8960246 C-Type Clip Ring
Z-SWX-420 8960240 Hexagon Socket Set Screw
Z-SWX-501
8960239
C-Type Clip Ring
Z-SWX-502
8960247
Wave Washer
Z-SWX-503
8960248
Lock Ring Completed
Z-SWX-002 8960249 Hexagon Key Wrench