Gesswein 510-2245, Instruction Manual

Page: 11 / 12

9 4
3.
Operating Procedure with Standard Controller
With your rotary handpiece fitted with a selected tool, connect the Gesswein
Power Controller to an electrical supply and the handpiece to one of the two
output sockets provided.
Set the Slide Rheostat on the Controller to “Low” or the “0” position. Put the
Controller Main Switch to the “ON” position, which lights up a pilot light that indi-
cates your rotary handpiece is ready to use.
To increase the speed of the rotary handpiece, move the Slide Rheostat toward
“High” or “10.” You can then begin working. When work is completed, put the
Main Switch to “OFF.”
To operate your rotary handpiece using the optional Variable-Speed Foot
Rheostat or optional On/Off Foot Switch, please refer to the Power Hand 2X
Controller Instruction Manual for proper connection. The handpiece will not
rotate until the foot rheostat/switch is depressed. The rheostat provides infinitely
variable speed control; the switch only turns handpiece on and off (operates at
speed selected on control unit).
UM20-316
ON10-301
KS-118
KS-119
KS-114B
KW-111
1140ZZ
KS-085
KS-119
KA20-104
KA20-104-BB
KF-203A
KF-210
1030ZZ
YSF21-103
S-10
KS-101
HE10A-203
ON10-204
KE-126
UM20-201
PKE60-103
YSP23-103
KE-127
KE22-504
UM20-761
UM20-561
UM20-651