Gesipa FireBird Pro S GE, Operating Instructions Manual

Page: 25 / 180

25
GB
3.2 Blind rivet nut is not unscrewed
Possible causes Corrective measures
Nut thread deformed/destroyed due to excessive
setting stroke (rapid flashing)
Remove nut using hexagon screwdriver (section
5; see figure 5);
Reduce setting stroke (section 2.3)
3.3 Set blind rivet nut is not completely set
Possible causes Corrective measures
Setting stroke too small Increase setting stroke in small steps (section 2.3)
Nut is incompletely fitted; consequently, the selec -
ted setting stroke is not achieved.
Fit nut correctly (section 2.4)
Selected setting stroke is not achieved Tool’s setting force is insufficient; observe the
working range (section 1.1)
Battery is discharged Charge the battery
3.4 LED lights flashing
Possible causes Corrective measures
Battery is discharged Charge the battery
Overload during extraction process (slow flashing) Observe the working range (section 1.1)
Nut cannot be unscrewed. Nut thread deformed/
destroyed due to excessive setting stroke (rapid
flashing)
Remove nut using hexagon screwdriver (section
5; see figure 5);
Reduce setting stroke (section 2.3)
3 beeps and flashing LED lights for 10 seconds:
The battery needs to be changed soon (about 20% battery charge remaining).
6 beeps and flashing LED lights for 10 seconds after every setting sequence: Change the
battery after a few more riveting sequences to guarantee safe and secure riveting sequences
(approx. 10% battery remaining).
9 beeps and flashing LED lights for 10 seconds: The next riveting sequence cannot be reliably
carried out. The tool is switched off. Change the battery.