P.12
P.13
5. Operation Instructions
5. Operation Instructions
3. Setting time and Temperature
Timer: After the desired function is selected, confirm by pressing the ENTER key “
” .
The corresponding timers will flash indicating it has been selected. Adjust the timer according to
preference. Press the selection key to set the hour, then select again to set the minutes.
Temperature: The temperature will flash indicating it has been selected. Press the selection key to set
the working temperature for “Upper heater element” and “Bottom heater element” for example. After
the setting the temperature, press the ENTER key “ ” to start.
Example: Adjusting Roasting Time and Temperature
1) After selecting the roast function , it will light up, the default time is 30 minutes, the temperature
is 180 °C.
2) Set the timer to 1 hour and 40 minutes. Set the hour first, then set the minute.
3) Set the temperature to 200 °C.
4) Press the ENTER key “ ” to start operation
Attention:
all functions follows this adjustment order except for functions with fixed time and
temperature settings.
Note:
water tank icon will be displayed when a steam-related function is selected (such as, steam,
high-temperature steam, ferment, unfreeze etc.), for example:
4. During Operation
Pause
During operation, the machine will pause when the ENTER key “ ” is pressed, this will stop the timer
countdown, the display interface will flash indicating the machine is in a paused status. Press the
ENTER key “ ” again, the machine will resume operation until the cooking is completed.
Timer and temperature adjustment during operation
During the Cooking/Baking / Roasting Process, if you want to adjust the cooking time or temperature,
the operation is as follows:
1) Press Setting key “ ” until the “Time-delay” icon “ ” on the screen is ON. At this time, the
minute display will flash. The minute functions can be adjusted by pressing the selection key “ ”
“ ”(setting hour is not available for delay time function).
2) After the minute is adjusted, press the ENTER key “ ” to enter the temperature.
If you do not need to adjust the temperature, please press the ENTER key“ ” to directly start
operation.
5. Program Finish
1) After the program has ended “END” appears on the display screen, and the buzzer will beep for 10
times. This indicates that the cooking is completed. Afterwards, you can open the door and take out
the food, the system will automatically enter standby status five minutes later.
2) After the program is over or in the standby state, for a pause or stop in the midway, the display
screen will show the high-temperature prompt icon so long as the Oven interior temperature is over
50
℃
and The centrifugal fan will delay the working time for 3 minutes.
3) After the program is completed with the steam function, icon will flash on the screen, which reminds
the user to take out the water tank and drain the water in the evaporator, then pour the residual
water from water holder. This icon will flash for 1 minute.
Note:
Removal of residual water and icon display are available only related to steam-related functions
and while evaporating heater is functional.
6. Oven Door Switch Protection
When the oven door is open, all functions will be suspended. All functions are restored when the door
is closed.
