3
Operation Manual
16
Operation Manual
DANGER
Cautions when gas leaks
Cautions for installations
When the gas leakage is detected,
close main gas valve, open the
windows and doors and call your
dealer or gas company.
Do not use the heater when the flue
duct is removed or clogged.
Close main gas valve.
Open windows and doors fully.
Call your dealer or gas company.
Do not turn on/off the electrical switches
or ignite fire.
No fire
A fire or an explosion may be caused.
Do not install the heater outdoors.
When the flue duct is removed or clogged,the exhaust
air leaks into the room and the abnormal combustion
of the heater may be caused. A carbon monoxide or an
oxygen depletion may becaused.
Indoor
Outdoor
A fire may be caused by an abnormal combustion or
the heater may be damaged by the rain.
氣體洩漏注意事項
安裝注意事項
切勿使用拆除煙道或煙道被堵塞之熱水器。
關掉主氣體閥門
盡量打開所有窗戶。
通知氣體代理商或油公司。
切勿將熱水器安裝於室外。
切勿開啟或關閉任何電掣或點火。
室內
室外
熄滅所有火源
可能引致火警或爆炸。
不正常燃燒可能導致生火或熱水器被雨水破壞。
危險
使用已拆除煙道或煙道被堵塞之熱水器，廢氣會進入室內
及熱水器不正常燃燒而可能產生有毒一氧化碳或缺氧。
氣體洩漏可引致火警或爆炸。
Gas leakage may cause a fire or an explosion.
若熱水器出現問題，安全裝置會啟動。
Safety devices will be activated when something is wrong with the heater.
1.操作時火焰熄滅
Flame on the burner turned off during operation
熄火安全裝置
Flame failure device
2.熱水器異常高溫
Heater become abnormally hot
防止過熱裝置
Overheat prevention device
3.無供水下燃燒
Combustion without water supply
防止空燒安全裝置
Empty combustion prevention device
4.超電流量
Excess electric flow
電流保險絲
Electric fuse
5.不正常高水壓
Abnormally high water pressure
超壓排泄閥
Pressure relief valve
若以上五個裝置之中其中有一個啟動，關掉主氣體及水閥門及通知代理商。
If one of above 1~5 devices is activated, close main gas and water valves and call the dealer.
故障代碼
Error Code
E0
出水探頭故障
Outlet Water Detector Failure
E1
點火失敗或意外熄火
Ignition Failure
E2
偽火故障
False Fire Failure
E3
溫控器故障
Temperature Controller Failure
E4
進水探頭故障
Inlet Water Detector Failure
E5
風機故障
Fan Failure
E6
超溫保護
Overheat Protection
E7
電磁閥開路故障
Breakage Fault of Solenoid Valve
Cautions for safety operations
安全操作注意事項
Please make sure to follow.
請確定遵從。
當發現氣體洩漏時，關掉主氣體閥門，打
開所有窗戶及通知氣體代理商或油公司。
