German pool GKH-24, Operating Instructions Manual

Page: 27 / 68

control can be done through shield setting on WEEKLY TIMER. Mode selection and
temperature adjustment and other operations are done through the manual control at every
unit.
Note:
1
、
For upper unit checks 16 lower units consecutively, there will be no more than 16
seconds delay when setting works till unit responds.
2
、
Please let us know your requirement before your placing the order, for this
WEEKLY TIMER will only be prepared when customer orders (communication
joint with WEEKLY TIMER on manual control had been prepared).
1
、
Press
▲
or
▼
to select the unit that needed to be control. It is available to control several
units by Group Control (1~16), or control single unit by Single Control.
2
、
When selected a certain or several units by Single Control or Group Control, Timer setting
and On/off setting can be set. Timer setting can set 4 on/off times in a day in one week;
and on/off setting can be done by pressing on/off button.
3
、
Connection between WEEKLY TIMER and manual control is shown as following:
Fig.
2
24