German pool EVB-120, User Manual

Page: 10 / 35

P.19 P.18
Example 3: Setting delayed cooking
It’s 8:00 am now, and you want to finish the cooking at 16:00 pm, and cooking time needs to be 45
minutes.
Press “ ” to set the cooking time length to 45 minutes as per above example. Press “ ” again, the
light and “8” start to blink. Adjust the timer to 16:00, and press “ ” again to set it. The display
goes back to clock. Then turn the oven to your desired cooking function and temperature. The oven
starts to work automatically at 15:15 pm, and the , and lights will be on ( light may go
off from time to time). At 16:00 pm, the oven will stop working, both and lights start to blink
and the alarm will warn 10 times. Press any key to get out of the setting, and the display goes back to
clock.
Manual Function Setting
In standby mode, long press “ ” till manual icon starts to blink. Oven starts working. Press “ ”
again, goes out and the appliance stops working. Press “ ” to set cooking period length. Setting is
confirmed by pressing “ ” key while the LED display goes back to clock.
NOTES:
1. Every valid touch comes with buzzer sound(200ms).
2. The appliance turns to standby mode after Cooking Period Time Length or other function setting is
completed without operation in 5s.
3. Cooking period length setting range:from 1 minute to 10 hours.
4. Delayed Cooking time setting shall not exceed 24 hours.
5. In stand-by mode, press “-” and “+” for 3s at the same time, hour and minute starts to blink.At
this time you can set the clock in the same way as clock setting.
Operating Instructions
Selecting a cooking function and temperature
IMPORTANT: Make sure that you have set your oven into manual operation mode before selecting an
oven function and temperature.
Before first use
• To remove any residue from the oven that may have been left from the manufacturing process,
you should select the fan oven function and set the thermostat to its maximum temperature
setting.
• It is perfectly normal for a smell to be produced during this process.
• You should make sure that any windows in the room are left open during this process.
• It is advisable for you not to remain in the room whilst the burning off process is taking place.
• You should leave the oven on maximum setting for 30 – 40 minutes.
• After the oven cavity has cooled, it should then be cleaned with warm soapy water, using either a
sponge or soft cloth. No abrasive cleaners should be used.
• Outer parts of the oven should be cleaned with warm soapy water, using either a sponge or soft
cloth. No abrasive cleaners should be used.
• We would recommend that an appropriate cleaner and polish is regularly used on the surfaces of
this appliance.
Operating Instructions